Stainless Steel 316 Sheets Stockist, SS UNS S31600 Coils, 316 SS Rings, ss 316 plates, ss 316l plates Suppliers, SS UNS S31603 Perforated Sheet, 316L SS Hot Rolled Plate, SS 316L Strips Manufacturer, ss 316l sheets, ss 316l plates Dealer in Mumbai, India.
PRAM RATAN STEEL supplies Stainless Steel 316/316L Sheet Plate, which has outstanding erosion and pitting confrontation. These 316L Stainless Steel Sheets are well appropriate for contrived or designed functions. Though SS 316 is not totally rust - proof, our 316L Stainless Steel Plates is more corrosion - resistant than any other related common alloys. Post - weld hardening in this SS 316L Structural is not essential when fusing thin units, where connection is proficient enough by brazing and fusing.
ASTM A240 Stainless Steel 316L Shim Sheets, SS Werkstoff No 1.4401 Sheets, SS 310L Circle, Stainless Steel 316L Cold Rolled Plates, Stainless Steel 316 Chequered Plates, 316 SS Chequered Plate Exporter, SS 316 Perforated Sheets Dealer in Mumbai,India.
Solidifying of our SS 316L Plates needs warming to the scopes of 1038 Deg C – 1149 Deg C preceding rapidly diminishing. These Stainless Steel 316L Sheets has contingent on gap and setting disintegration in warm chloride airs, and furthermore to SCC surpassing around Sixty Degree Celsius. Our 316 Stainless Steel Sheets is for the most part used in Chemical apparatus and allotment, Laboratory cheap seats and hardware, and so on.
Standards Specifications of Stainless Steel 316 / 316L Sheet Plate :
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Range : 5mm To 150mm
Thickness : 4.0mm - 100mm)
Size : 1/4" to 4"
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Applications :
Chmical Composition of Stainless Steel 316 / 316L Sheet Plate :
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
|---|---|---|---|---|---|---|---|---|---|
| SS 316 | 0.08 max | 2 max | 1.0 max | 0.045 max | 0.030 max | 16.00 – 18.00 | 2.00 – 3.00 | 11.00 – 14.00 | 67.845 min |
| SS 316L | 0.035 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 16.00 – 18.00 | 2.00 – 3.00 | 10.00 – 14.00 | 68.89 min |
Mechanical Properties of Stainless Steel 316 / 316L Sheet Plate :
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| SS 316 | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| SS 316L | 8.0 g/cm3 | 1399 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Types of Stainless Steel 316 / 316L Sheet Plate :
| ASTM A240 Stainless Steel 316L Sheets | ASTM A240 Stainless Steel 316 Coils |
| SS 316L Profile Stockist | SS 316 Foils |
| Stainless 316 Perforated Coils | Stainless Steel 316 Strips |
| SS DIN 1.4404 / 1.4435 Sheets & Plates | Stainless Steel DIN 1.4401 / 1.4436 Rings |
| SS 316 Circles Manufacturer | Steel 316 Blank Distributors |
| Stainless UNS S31603 Circles | SS 316 Plain Sheets Stockholder |
| SS 316L Flats Exporter | SS 316 Chequered Plate Dealer |
| SS 316L Rolls | SS 316 Perforated Sheet Suppliers |
Stainless Steel 316 / 316L Sheet Plate are offered with a NACE 3.1 Certification, Mill Test Certification and ISO 17025 Standards by a Government of India approved Laboratory. Positive Material Identification is done on all raw material procured at PRAM RATAN STEEL India.
