Alloy 20 Pipe Fittings Exporter In India, Carpenter 20 Pipe Reducer, ANSI B16.9 Alloy 20 Welded Butt weld Fittings, ASTM B366 Incoloy® alloy 20 90 degree Elbow Exporters, ASME B16.28 Alloy 20 Buttweld Fittings, UNS N08020 Incoloy Buttweld Fittings, ASME B16.9 Alloy 20 Pipe Fittings
PRAM RATAN STEEL offers a wide bunch of Alloy 20 Pipe Fittings, where our whole item extend is utilized as a part of changed modern segments. There has for some time been a level headed discussion on whether these Alloy 20 Dish Cap Butt Weld Pipe Fittings is a stainless steel or a nickel compound on the grounds that the nickel content is spot on the fringe of characterizing it as one way or the other.
Alloy 20 Werkstoff Nr. 2.4660 Butt Weld Pipe Fittings Manufacturer, Alloy 20Cb-3® Equal Tee, Supplier of Carpenter 20 45 degree Elbow, ASME SB366 Incoloy® alloy 20 Long Stub, ASTM B366 Alloy 20 Buttweld Fittings, Alloy 20 90 & 45 Deg Elbows, Alloy 20 Long & Short Radius Elbows
Particularly to withstand sulfuric corrosive, these Alloy 20 Tee Butt Weld Pipe Fittings' nickel, chromium, molybdenum and copper levels all give great general erosion obstruction. Our Alloy 20 Pipe Reducer (UNS N08020) is an austenitic, nickel – press – chromium based super composite with increases of Copper and Molybdenum which give protection from unfriendly situations, setting, and hole consumption.
Standard Specifictaion of Alloy 20 Pipe Fittings :
Schedules: Sch 5 TO Sch XXS.
Size: Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Dimention: ASME / ANSI B16.9, B16.11, B16.28, B16.5, MSS SP-43, GB12459, GB/T13401, GB/T14383, SH3406, SH3408, SH3409 etc. .
Standard : ASTM / ASME / ANSI
Applications :
Chemical Composition of Alloy 20 Pipe Fittings :
| Alloy 20 | Ni | C | Mo | Mn | Si | Fe | Cu | S | P | Cr |
|---|---|---|---|---|---|---|---|---|---|---|
| 32 – 38 | 0.02 max | 2 – 3 | 1 – 2 | 0.7 max | Bal | 3 – 4 | 0.005 max | 0.02 max | 19 – 21 |
Mechanical & Physical Properties of Alloy 20 Pipe Fittings :
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
|---|---|---|---|---|
| 8.1 g/cm3 | 1443 °C (2430 °F) | Psi – 35000 , MPa – 241 | Psi – 80000 , MPa – 551 | 30 % |
Types of Alloy 20 Pipe Fittings :
| Pipe Elbow | Pipe Tee |
| Pipe Cross | Pipe Reducer |
| Pipe End Cap | Pipe Bends |
| Pipe Stbend-Lap Joint |
Other Available Types of Alloy 20 Pipe Fittings :-
| Carpenter 20 Equal Cross | Alloy 20 Equal Cross |
| Incoloy® alloy 20 Alloy Equal Cross | Alloy 20 WERKSTOFF NR. 2.4660 Equal Cross |
| Alloy 20Cb-3® UNS N08020 Equal Cross | Incoloy® alloy 20 UNS N08020 Bend |
| ANSI B16.9 WP Alloy 20 Equal Cross | Alloy 20 WERKSTOFF NR. 2.4660 Bend |
| ASTM B366 Alloy 20 Bend | Carpenter 20 Alloy Bend |
| Alloy 20Cb-3® Bend | Alloy 20 Pipe Bend |
| ASTM B366 20 Alloy End Cap | Alloy 20 WERKSTOFF NR. 2.4660 End Cap |
| Alloy 20Cb-3® UNS N08020 End Cap | Carpenter 20 Alloy End Cap |
Alloy 20 Pipe Fittings are offered with a NACE 3.1 Certification, Mill Test Certification and ISO 17025 Standards by a Government of India approved Laboratory. Positive Material Identification is done on all raw material procured at PRAM RATAN STEEL India.
In 2016 we have ready stock of more than 50 tons of Alloy 20 Pipe Fittings in all sizes, to cater to immediate delivery and urgent needs of the clients. For small requirements we can dispatch the steel pipe & tubes immediately against the purchase order.
