Prime Quality Stainless Steel 904L Buttweld Fittings, ASTM B366 904L Buttweld Fittings, Stainless Steel 904L Butt Weld Pipe Fittings, Stainless Steel UNS N08904 Buttweld Fitting, SS DIN 1.4539 Seamless Buttweld Fittings, ASME SB366 SS WP904L Pipe Elbow Stockiest, 904L Welded Butt weld Fittings Distributor in India.
General erosion of Stainless Steel 904L Reducer Pipe Fittings is not as much as SS 904, and is protection from an assortment of destructive media. Stainless Steel 904L Tee Pipe Fittings is utilized where protection from bury – granular consumption is required and where the parts are subjected to supported warming or cooling inside the scope of 800 Degree F to 1500 Degree F. Stainless Steel 904L Cross Pipe Fittings is normally utilized as a part of uses.
Stainless Steel 904L Butt weld Fittings, 904L Butt Weld Fittings, Stainless Steel 904L Pipe Fittings, 904L Butt weld Elbow, SS 904L Butt weld Fittings, SS SUS 904L Buttweld Tee, ANSI B16.9 SS 904L Stub End, 904L SS Reducer Dealer, 904L Buttweld Pipe Cap Supplier in Mumbai, India.
PRAM RATAN STEEL is one of the pioneer wholesaler and dealer for SS 904L Butt Weld Pipe Fittings, which is provided in a scope of various conditions/tempers relying upon the level of quality required. Stainless Steel 904L Elbow is chromium – nickel stainless steel and with the expansion of titanium, and is impervious to entomb – granular consumption.
Standard Specifictaion of 904L Buttweld Fittings :
Specification: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Size: ½" NB – 4" NB
Standard: ASTM A182 / ASME SA182
Type : Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT, Threaded Fitting
Applications :
Chemical Composition of 904L Buttweld Fittings :
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Cu |
|---|---|---|---|---|---|---|---|---|---|
| SS 904L | 0.020 max | 2.00 max | 1.00 max | 0.040 max | 0.030 max | 19.00 – 23.00 | 4.00 – 5.00 max | 23.00 – 28.00 | 1.00 – 2.00 |
Mechanical & Physical Properties of 904L Buttweld Fittings:
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
| 7.95 g/cm3 | 1350 °C (2460 °F) | Psi – 71000 , MPa – 490 | Psi – 32000 , MPa – 220 | 35 % |
Types of 904L Buttweld Fittings:
| Pipe Elbow | Pipe Tee |
| Pipe Cross | Pipe Reducer |
| Pipe End Cap | Pipe Bends |
| Pipe Stbend-Lap Joint |
Types of 904L Buttweld Fittings Other Available Types :-
| Sosta Stainless Pipes Make Stainless Steel 904L Buttweld Fittings | Tata Structura Make Stainless Steel 904L Pipe Fittings |
| Tata Tubes Make SS 904L Butt weld Fittings | ISMT Ltd Make Stainless Steel 904L Buttweld Pipe Fittings |
| Arcelor Mittal Make Stainless Steel 904L Nipple Distributor | 304L SS Concentric Reducers |
| Jindal India Make ASME SB366 SS 904L Buttweld Tee Stockist | Wrought Austenitic 904L Piping Fittings |
| Jindal Saw Ltd. Make 904L SS Concentric Reducers | SS WP904L End Pipe Cap Exporter |
| SS 904L Reducers | Essar Steel Make 904L Buttweld Fittings |
| Suraj Limited Make SUS 904L Stainless Steel Pipe Bend | 904L SS Long Radius Elbow Stockiest |
| Stainless Steel DIN 1.4539 Equal Tee | Tata Steel Make 904L Butt weld Elbows |
904L Buttweld Fiiting are offered with a NACE 3.1 Certification, Mill Test Certification and ISO 17025 Standards by a Government of India approved Laboratory. Positive Material Identification is done on all raw material procured at PRAM RATAN STEEL India.
In 2016 we have ready stock of more than 50 tons of 904L Buttweld Fittings in all sizes, to cater to immediate delivery and urgent needs of the clients. For small requirements we can dispatch the steel pipe & tubes immediately against the purchase order.
